Insert the capsule, pressing it gently into place. Close the lever firmly. Place a cup or mug under the beverage dispensing spout. To deactivate or reactivate this function, proceed as follows: Make sure the lever is lowered. Page Adjusting For Different Cup Sizes Adjusting for different cup sizes To use espresso cups, lift and turn the grill on top of the drip tray.
The grill must be positioned over the drip tray turned. Your machine is now set for use of espresso cups. Page Daily Maintenance Daily maintenance Lift the capsule container, empty and rinse. Remove the drip tray and used capsule container. Remove the grill. Empty the drip tray and rinse it with fresh water. Remove the water tank. Empty and rinse. Use a soft, dampened cloth to clean the surfaces of the machine. Page Descaling The Machine Avoid contact with eyes, skin and machine surfaces.
Do not use vinegar: it could damage your appliance! Place a cup or mug under the beverage dispensing spout. The button is now programmed. To reprogram the button or program another button repeat the above steps. To deactivate or reactivate this function, proceed as follows: 6 Make sure the lever is lowered.
When the function is reactivated, the alarm indicator light will blink and beep two times. To restore normal operating conditions, press any button or raise the lever.
The appliance will start warming up. When the appliance is ready for use the buttons will be steadily lit. Empty the drip tray and rinse it with fresh water.
Remove the water tank. Empty and rinse. Use a soft, dampened cloth to clean the surfaces of the machine. The plastic parts of the machine are not dishwasher safe. The Contata features an advanced program that detects when it needs to be descaled.
Refer to section 3 for descale indicator guidelines. Carefully read the directions for use on the package of the descaling agent. Avoid contact with eyes, skin and machine surfaces. Do not use vinegar: it could damage your appliance! During descaling, do not turn the machine off. During this cycle, the descale and alarm indicator lights blink alternately. Press the long espresso button to start the descale cycle. The descale cycle lasts for approximately 40 minutes.
During this cycle the descale and alarm indicator lights blink alternately. Press the long espresso button to start the rinse cycle. Press the long espresso button to exit the rinse cycle. Liquids may freeze and damage the machine. When all 6 beverage buttons are illuminated and empty any priming water. Replace the drawer. Place the and not flashing and the red indicator light is off; Page 9 Brewing Beverages continued Select the capsule of your choice.
Choose from espresso, coffee, teas or hot chocolate Raise the capsule lever to access the top of the capsule compartment. Gently load the selected capsule into the capsule cut-out. Page 10 Brewing Beverages continued In approximately 3 seconds, a hot, steaming beverage will flow through the dispensing spout into the cup or mug on the drip plate.
If, at any time during brewing, the red indicator light begins to flash and the 3 audible beeps are heard, the water tank is empty. Press any brewing button; the appliance will resume dispensing. Shop Now. It couldn't be easier. Optimal flavor extraction. Quality and convenience.
0コメント